How to Pull a Honda Fender

Fender - Honda Accord - Part Pull Guide

1.How to Pull a Honda Fender

  1. Remove the front bumper and headlight (part pull guides included)
  2. Remove the three screws holding on the mud flap.
  3. Remove the outer plastic clips that hold on the plastic cover inside the fender with a flathead screwdriver.
  4. Remove the 10 mm fastener under the rocker panel.
  5. Open the front door and remove the 10 mm fastener hidden inside the door well.
  6. Remove two additional fasteners at the front of the car right below the headlight space.
  7. Pull the fender from the car.

Suggested Tools

  • Phillips and flathead screwdriver
  • Wrench or socket set (10 mm wrench or socket)

Tooltip: Remove the part at home before you come to the yard – this way you’ll know what tools to bring!

2.How to Pull a Honda Front Bumper

  1. Remove two plastic clips on the front of the bumper beside each headlight.
  2. Inside the wheel wells, where the bumper cover attaches to the front fenders, remove the 10 mm fastener on each side.
  3. With the fasteners and clips removed, you can pull the bumper cover off of the front on the car. Be careful not to let painted surfaces scratch against the ground.

Suggested Tools

  • Flathead screwdriver
  • Wrench or socket set (10 mm wrench or socket)
  • Cordless impact

Tooltip: Remove the part at home before you come to the yard – this way you’ll know what tools to bring!

3.How to Pull a Honda Headlight Assembly

  1. Remove the three fasteners underneath the headlight.
  2. Remove the 10 mm fasteners from the top of the headlight.
  3. Pull headlight out slightly to disconnect the electrical connectors.
  4. Once connectors are disconnected, you can pull the headlight from the car.

Suggested Tools

  • Flathead screwdriver
  • Wrench or socket set (10 mm wrench or socket)

Tooltip: Remove the part at home before you come to the yard – this way you’ll know what tools to bring!

Suggest Edit